Oilfield Air Compressor Service, Instrument Air and Rentals in the Eagle Ford
ProParts services, supplies and rents compressed air and instrument air equipment for oil and gas operations across the Eagle Ford, from the Rio Grande Valley to San Antonio: Live Oak, McMullen, Karnes, Atascosa, La Salle, Dimmit and Webb counties, around George West, Three Rivers, Tilden, Kenedy, Cotulla and Carrizo Springs. Rental compressors and dryers keep a site on air while the installed unit is repaired, and emergency service is a flat $1,100 service call, about four hours of technician labor, with no after-hours surcharge, any hour.
Service in the Eagle Ford
Instrument air keeps pneumatic valves and controllers running at well sites, compressor stations and gas plants, and when the compressor or the dryer fails, the site goes to manual or shuts in. We service and supply rotary screw compressors and desiccant dryers sized for instrument air, and we rent units to keep a site on air while the installed one is repaired.
What we do here
Instrument air for well sites, compressor stations and gas plants is a different job from plant air: remote sites, dust, heat, and a dryer that must hold dew point or valves stick. Emergency repair at a flat $1,100 service call, about four hours of technician labor, with no after-hours surcharge: give us a card or a PO number and a technician is on the way, any hour. Rotary screw compressors are our specialty, on ELGi, Bobcat, Ingersoll Rand, Atlas Copco, Kaeser, Sullair and Gardner Denver machines, and we service Zeks and Mikropor dryers and air treatment.
- 24/7 emergency repair, flat $1,100 service call
- Preventive maintenance agreements with the 24/7 line included
- Installation of compressors, dryers and AIGNEP aluminum piping
- Energy audits and leak surveys
- Rebuilds of rotary screw compressors and motors
- Rental compressors and dryers while yours is repaired
Who we work with
Operators, midstream compressor stations and gas processing plants, saltwater disposal sites, oilfield service companies, and the fabrication yards that support them.
Seven technicians across three offices, in San Juan, Texas, Reynosa and Monterrey, answer in English and Spanish. Plants from Kohler and Black & Decker are among the customers who trust us with their compressed air.
Compressor problems we fix in the Eagle Ford
Most emergency calls come down to a short list of failures. The technician arrives with the tools to diagnose all of them on the first visit and tells you which parts, if any, are needed before anything is ordered.
- Compressor runs but will not build pressure: inlet valve, minimum pressure valve or a leaking separator element
- High temperature shutdown: cooler fouling, low oil, thermostatic valve or a failed fan motor
- Oil in the air lines or at the point of use: separator element, scavenge line or an overfilled sump
- Water in the air: refrigerated dryer not holding dew point, failed condensate drain or an undersized dryer
- Short cycling, loading and unloading every few seconds: pressure switch, control settings or a plant leak load
- Controller faults, VFD alarms and motor overloads on ELGi, Bobcat, Ingersoll Rand, Atlas Copco, Kaeser and Sullair machines
Frequently asked questions
Do you repair small shop compressors or only industrial units?
Both. Rotary screw compressors in plants are our specialty, but the same technicians repair piston compressors in tire shops, body shops, dental offices and machine shops. If the compressor runs a business, we work on it.
How fast can you get to the Eagle Ford?
Service is 24/7/365 and a technician is dispatched any hour; we dispatch from the Valley and from Monterrey; sites between George West and Cotulla are usually reached within a few hours.
Is the $1,100 really the same at night and on weekends?
Yes. The service call is $1,100 at any hour, any day of the year. There is no after-hours or weekend surcharge.
What does the $1,100 cover?
The trip, about four hours of technician labor, troubleshooting to root cause, and a signed service report with photos. Parts are quoted separately and ordered only with your approval. We do not bring parts to the site unless you ask for specific ones when you call.
What if nobody is on site to approve the work at 2 AM?
Customers on a maintenance agreement are already covered. Existing customers can give a verbal PO number from the plant manager, confirmed in writing the next business day. New customers sign a one-page emergency service authorization on the technician's tablet, and that signature is your PO backing.
Do you supply instrument air dryers?
Yes. Zeks and Mikropor desiccant and refrigerated dryers, sized to the dew point the controls need, with the filters and drains to match.
Talk to a technician
Call (956) 462-0947, any hour. Mexico: +52 899 573 4953. WhatsApp: +1 (956) 462-0947. Email rfq@pro-parts-inc.com for a quote.
Related
- 24/7 air compressor repair
- Preventive maintenance agreements
- Compressed air piping and installation
- Compressed air energy audits
- Rotary screw compressor rebuilds
- Compressor and dryer rental
- McAllen
- Mission and Edinburg
- Harlingen and Brownsville
- Corpus Christi
- Reynosa
- Matamoros
- Nuevo Laredo
- Piedras Negras
- Ciudad Acuña
- Monterrey
