Product Description
A compressed air system can be considered as the fourth-biggest energy source after water, gas, and electricity. The efficient way of storing and transmitting energy makes compressed air usages highlighted. Oil is used in most compressed air systems to dissipate the heat of compression, lubricate rotors and rotor bearings, and seal the edge between the rotor and the compressor casing. For that reason, there is so much oil content in the drain of the compressor. In addition to oil, other contaminants are also included the water while the air is pressurized and produces compressor condensate. This condensate mixture is defined as a highly harmful industrial waste. One liter of oil can contaminate one million liters of water. For that reason, it is forbidden to drain this condensate without any oil removal system. Also, most of the countries put restrictive laws about the thresholds of oil content in the drains. Consequently, the separation of oil is a must for protecting the environment and for obeying the laws.
Mikropor MWOS Series Oil-Water Separator Units supply you to separate oil content in the drain according to ISO 14000 standards reliably and cost-effectively. 3000 to 500 ppm range of oil content can be decreased to 10 ppm. Also, it has a user-friendly installation and maintenance procedure that minimized the downtime of the machine.
Features
- Low carbon footprint
- Eco-friendly drain according to ISO 14000
- Low weight and easy installation
- The indicator that shows overload of the flow
- User-friendly maintenance procedure
- Ware resistant multiple inlet ports
- Oil storage box that obeys environmental regulation of oil collection (for MWOS-37 and MWOS-55 Models)
- Filtering system that prevents particles to enter the system from the environment
Working Principle of MWOS-11 Model
- MWOS-11 has been designed to separate and clean the oil-water condensate from the compressor system. The unit consists of inlet and outlet ports, special material, bulk oil removal shred, and anti-siphon venting port.
- The oily water entering from the inlet is degreased by the bulk oil removal shred and special material, respectively.
- The clean water accumulating inside the unit is discharged from the outlet port by passing through the discharge pipe accordance with the anti-siphon vent.
* Please note that the MWOS-11 Model Unit is a single-use product.
