Product Description
The Zeks SDD200HSS is a 250 psig pneumatically operated demand drain with a stainless steel ball valve for discharging compressed air condensate without air loss. It runs on dry compressed control air, with a typical service pressure of 80 to 130 psig, and needs no electricity. The drain cycles only when a set amount of condensate has collected in its translucent reservoir.
Details
- Brand: Zeks
- Part number: SDD200HSS
- Pressure rating: 250 psig
- Operation: pneumatic; control air is isolated from the compressed air in the reservoir, with a test button to confirm control air supply
- Discharge: 24 ounces per cycle through a 1/2 in. full-port ball valve
- Float: stainless steel, starts the discharge cycle as condensate rises
- Ball valve support mechanism eliminates side-loading on the valve seal
- Top or bottom inlet port; no vent line required when the top port is used
- Low, horizontal profile for installations with limited clearance below the vessel
- Condition: New
- Weight: 23 lb
- Ships from: San Juan, Texas
Part number cross-reference
SDD200HSS (SDD200H series)
